Chain rail extension kit for garage door operatorONE
1x motor ONE rail profile Lg 1m
1x chain Lg 2m + 2 quick-release clips
1x connection
Compatible only with our engines ONE
Please note that if your rail is in one piece, you will need to order 1 additional rail connection.
Garanties sécurité
(à modifier dans le module "Réassurance")
Politique de livraison
(à modifier dans le module "Réassurance")
Politique retours
(à modifier dans le module "Réassurance")
Assembly, to be made motor deposited on trestles or on the ground :
1) If your rail is in several parts with connector(s), it is very simple:
- slacken the chain and undo the quick link of the chain on the driving link side
- remove the components of the rail
- insert and re-insert the 1 m profile with an existing connector and the new one with a new connector.
- Extend the chain with the 2 quick-release skewers and connect to the drive link.
- Tighten the chain (if necessary revise the length of the chain)
2) If your rail is in one piece :
ATTENTION You have to order a second connection!
- slacken the chain and undo the quick link of the chain on the driving link side
- cut the rail in half using a grinder
- Insert and push back the 1 m profile with the kit connector and the 2nd connector (order separately! )
- Extend the chain with the 2 quick-release skewers and connect to the drive link.
- Tighten the chain (if necessary revise the length of the chain)
check_circle
check_circle
Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent