1 white PVC round frame outside
2 translucent plexi-granite shells for the glass block
1 white PVC round frame outside
6 screws 5x50 (for 40 mm insulation)
6 screws 5x30 (for 20 mm insulation)
1m foam gasket (for 20 mm insulation)
(à modifier dans le module "Réassurance")
(à modifier dans le module "Réassurance")
(à modifier dans le module "Réassurance")
After creating the cut-out in the panel (a circle of Ø290mm), the 2 frames are fitted and screwed together.
The set is designed for 40mm panel.
For a 20mm panel, use only one shell for the glass block, and glue the foam gasket on the inside.
Caution, when screwing in, tighten moderately.
check_circle
check_circle
Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent