Cat flap for a garage door or PVC door
Cat door with transparent shutter with 4 positions: entry only, or exit only or entry/exit or closed
Dimensions :
Outside W 225 x H 252 mm - Inside W 145 x H 148 mm
Supplied with a spacer strip + 2 rivets to adapt to different thicknesses.
Maximum thickness of 50 mm
Available in white , brown or grey 7012
Garanties sécurité
(à modifier dans le module "Réassurance")
Politique de livraison
(à modifier dans le module "Réassurance")
Politique retours
(à modifier dans le module "Réassurance")
Installing a cat flap on a sectional or up-and-over garage door, or a more traditional entrance door (PVC door for example), is generally done in the same way as installing a porthole.
The video below shows you how to make the necessary hole cleanly and without damaging your door.
To install a cat flap on a metal garage door, i.e. not insulated, you will need to use a disc grinder.
This cat flap is delivered with a spacer allowing it to be placed without hindrance on a door up to 50mm thick. If your door is not insulated (single sheet metal door for example), you will not have to use this finishing spacer to install your cat flap.
check_circle
check_circle
Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent