These top brackets are adjustable in height and allow a finer adjustment of the top panel veneer on the joint of the top rail.
Made of thick steel
Pair, sold with 2 casters
Stem of roller Diam 11 - L95mm
Diameter of the roller 45mm
Ball bearing
For double track door
(sheet metal screws not supplied)
Garanties sécurité
(à modifier dans le module "Réassurance")
Politique de livraison
(à modifier dans le module "Réassurance")
Politique retours
(à modifier dans le module "Réassurance")
This pair of High Roller Brackets for Sectional
Garage Doors is adjustable and is only compatible for double track sectional garage doors.
Easy to set up!
1) Press the top panel against the top rail joint.
2) Pre-set the bracket halfway (side screws in the middle of the adjustment lights)
3) Place the bracket on the panel with the roller in the rail.
4) Screw the fixed base plate with a screwdriver and a 10 mm bit (4 sheet metal screws not supplied).
5) Adjust the final height by checking the panel plating and secure the side screws with an 8 mm spanner.
check_circle
check_circle
Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent