Garage door motor bracket to be placed on the spacer crossbar at the back of the door tracks (crossbar not supplied)
This support allows the rear fixing of your motor rail, directly on your spreader bar. Which is very useful if your ceiling is high and out of reach of angles.
Designed for a 55 to 81mm wide motor rail .
Contents of the kit:
1 black lacquered support
1 cavalier rail ONE
4 M8 bolts
Garanties sécurité
(à modifier dans le module "Réassurance")
Politique de livraison
(à modifier dans le module "Réassurance")
Politique retours
(à modifier dans le module "Réassurance")
Trick
Depending on your configuration and the width of your garage door, the spreader bar may be slightly flexed by applying the weight of the motor to its center.
To counter this, this support is designed to accommodate a reinforcement cable (in the center) or two (in V) to hang from the ceiling or on your frame. These optional cables can be ordered separately (2mm cable present below).
check_circle
check_circle
Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent